Skip to product information
Complete Drink Course Kit

Complete Drink Course Kit

€825,00 EUR

Set for 1 car + 1 driver
Weight: 800 grams (excluding suitcase)

PRODUCT INFORMATION

Set for 1 car + 1 driver, weight: 800 grams (excluding suitcase)
Including:
- 1 water bottle holder to be fixed in the car including 1 transparent hose connection of a
length of 2 meters + 1 electrical connection of a length of 2 meters + 1 non-return + 1
female waterproof connector + 1 double yellow “car” plug Drink+radio (radio cable not included)
provided),
- 1 stainless steel racing water bottle with its motor/pump cap,
- 1 headset connection with 1 male waterproof connector + 1 double yellow “headphone” plug
Drink + radio (radio cable not supplied) + 1 large diameter transparent pipe connection + 1 union
180° connection + 1 small diameter transparent pipe connection + 1 90° plate
- 1 pocket with self-gripping accessories for quick attachment of elements + 3
Radio cable blockers on helmet + 2 radio cable retaining clips on pipe.
- The kit is delivered in a hard carrying case.
Additional engine/pump bottles are available in Accessories, as are
the stand water bottle and maintenance accessories.
The kit installation guide is available via a QR code located on the bottle sticker.
A maintenance service is available to ensure the total longevity of your
materials.

DIRECTIONS FOR USE

Extrem Drink is the answer to your needs, created by pilots committed to the
performance and who have experienced the suffering of overheated cabins.
Whatever the race, replenishing your natural needs through regular hydration is
essential for the preservation of your physical and mental capacities. This helps to increase
your performance but also your recovery time, therefore your endurance, all of it
allowing you to make victory accessible.
No more on-board drinking systems with pump integrated into the fixed support of the
car, where a good amount of water stagnates between two races. With Extrem Drink, more
bad taste in the mouth or nausea from stale water.
The Extrem Drink bottle/pump, like the stand bottle, is completely dishwasher safe.
and the flexible connections are easily purged.
Single or double O-rings ensure a perfect seal on the support
embedded in the car and are easily interchangeable. The waterproof connectors
of the bottle are protected so as not to break in the event of an accidental fall.
The whole thing is robust enough to be forgotten and just serve you for a long time.
A 12 volt power supply and a punctual electrical intensity of 0.550 A are sufficient for the
implementation of the Extrem Drink set. An electrical kit with cable/button/fuse is
present in Accessories as needed.
The design is studied down to the smallest details, such as the evacuation of the
dust or sand, so that they do not accumulate in the wrong places.
Changing the bottle takes 2 seconds.
The Extrem Drink holder, which must be positioned vertically, can be attached to the hoop by
metal clamps or x4 M6 screws on a suitable rigid support. The plug
yellow is to be fixed via plastic collars, via 2 installation axes, the rear part can be
drilled to suit for screw fixing.
We can design all accessories and supports according to your recommendations.
measurement (see section Custom Drink)

The manufacturing time of our products is controlled.
In case of stock shortage or if you need a quantity greater than that usually available on the site, please contact us.

recommended products