Skip to product information
DOUBLE_PLUG_DRINK_CASQUE Extrem Motorsport
1/3
  • DOUBLE_PLUG_DRINK_CASQUE Extrem Motorsport
  • DOUBLE_PLUG_DRINK_CASQUE Extrem Motorsport
  • DOUBLE_PLUG_DRINK_CASQUE Extrem Motorsport
  • DOUBLE_PLUG_DRINK_CASQUE Extrem Motorsport
  • DOUBLE_PLUG_DRINK_CASQUE Extrem Motorsport
  • DOUBLE_PLUG_DRINK_CASQUE Extrem Motorsport
Double plug Drink headphones - DPC-410

Double plug Drink headphones - DPC-410

€99,90 EUR

Water and radio connection connector positioned on the Extrem Drink part on the pilot helmet side.

For further explanation see the tabs below.
PRODUCT INFORMATION

Element allowing the driver to be connected and disconnected from its Extrem Drink drink supply and its radio (radio cable not supplied).

This product is made of high density ABS with a professional printer (Stratasys).
It is robust and has been tested positively on long sand raids or 24-hour endurance races.

The design is compact so as not to subject the connectors, drinks or radios to destructive leverage effects in the medium term.

Including:
- 1 plug for the male radio connector and the male waterproof Drink headset connector,
- 1 set of self-gripping straps.

For any specific radio connector to be integrated into the yellow connector, do not hesitate to contact us.
DIRECTIONS FOR USE

The two half-hulls fit very simply around the water and radio elements.
Depending on the radio connectors used, a small mechanical adjustment may need to be made.

It is recommended to position the plug on the side of the helmet and not on the top to facilitate the installation of the driver without getting caught in the roll bar or the narrow opening of the door.

Depending on the location of the plug on the car side, the driver can easily unclip it and reposition it on his helmet before exit a vehicul.

The manufacturing time of our products is controlled.
In case of stock shortage or if you need a quantity greater than that usually available on the site, please contact us.

recommended products