Skip to product information
Support AIM Mychron6
1/5
  • Support AIM Mychron6
  • Support AIM Mychron6
  • Support AIM Mychron6
  • Support AIM Mychron6
  • AIM support Mychron6 - SAM-900
  • Support AIM Mychron6
  • Support AIM Mychron6
  • Support AIM Mychron6
  • Support AIM Mychron6
  • AIM support Mychron6 - SAM-900
AIM support Mychron6 - SAM-900

AIM support Mychron6 - SAM-900

€149,90 EUR

Mechanical support allowing an ideal position of the AIM Mychron6 counter within the central spoiler of the kart.

For further explanation see the tabs below.
PRODUCT INFORMATION

If, like most pilot and managers, you do not use the steering wheel angle measurement, positioning the increasingly heavy on-board measuring electronics on, it creates inertia which greatly compromises the responsiveness and precision of the trajectory, and therefore ultimately your performance.

The Mychron6 bracket fits between the metal brackets holding the central spoiler of the OTK chassis. The bracket is perfectly locked in place by the two original M6 screws.

The Mychron6 is installed via the original nut and washer, which remain easily accessible.
Charging via the USB connector remains accessible once the Mychron6 is placed on the support.
The temperature management connector is perfectly accessible.

The stand weighs 90 grams.
Validated with OTK 2025 chassis.

Kit including:
- 1 support bar
- 1 M8 counterform
DIRECTIONS FOR USE

The sensation of finding free and precise steering is surprising during the first few turns, then quickly forgotten.

Always possible during an impact, rotation of the support Mychron6 should be avoided.
To do this, insert 1 Grower-type lock washer between the metal support of the central spoiler and the Mychron6 support.
Tighten everything firmly using the 2 original M6 screws.

The manufacturing time of our products is controlled.
In case of stock shortage or if you need a quantity greater than that usually available on the site, please contact us.

recommended products