Skip to product information
Mychron6 Support
  • Mychron6 Support
  • Mychron6 Support
  • Mychron6 Support
  • Mychron6 Support
  • Mychron6 Support
  • Mychron6 Support
  • Mychron6 Support
  • Mychron6 Support
  • Mychron6 Support
  • Mychron6 Support
Mychron6 Support

Mychron6 Support

€149,92 EUR
PRODUCT INFORMATION

Placing the increasingly heavy onboard electronics on the steering wheel creates a moment, an inertia that compromises performance. Moreover, in the sun, it is sometimes difficult to read information or alarm LEDs.
The support is placed between the central aerodynamic cover retaining brackets of the OTK chassis and is secured by the two original M6 screws.
The Mychron6 is installed via the original nut and washer, which remain easily accessible.
Charging via the USB connector remains accessible once the Mychron6 is placed on the support.
The T° management connector is perfectly accessible.
The stand weighs 90 grams.
Validated with OTK 2025 chassis.

Kit including:
- 1 support bar
- 1 M8 counterform
DIRECTIONS FOR USE

The sensation of finding free and precise steering is surprising during the first few turns, then quickly forgotten...
Although not serious, rotation of the bracket is always possible in the event of an impact. To do this, insert a fan-shaped lock washer between the aero housing bracket and the Mychron6 bracket. Tighten everything firmly using the two original M6 screws.

The manufacturing time of our products is controlled.
In case of stock shortage or if you need a quantity greater than that usually available on the site, please contact us.

recommended products