Skip to product information
COMPLETE EXTREM DRINK KIT WITHOUT PUMP (Race) - DSC-200
1/3

COMPLETE EXTREM DRINK KIT WITHOUT PUMP (Race) - DSC-200

€699,90 EUR

Pilot hydration kit, ready to be mounted in the car, without the need for power supply, 100% reliable. 

Thanks to the mastery of fluid mechanics and physical laws, benefit from the quintessence of pilot hydration systems, without pump and without electrical circuit, just natural aspiration from the mouth.

The support is positioned vertically in the vehicle and the water bottle can be quickly disconnected during driver changes, without risk of leakage!
A flexible connection and the accessorisation of the helmet brings water to the pilot’s mouth. A radio and drink interface allows very fast disconnection of the driver during the relay.
The water bottle is dishwasher-safe for perfect hygiene.

For further explanation, see the tabs below.

PRODUCT INFORMATION

The set is positioned vertically, bottle cap facing up: no more leaks possible.
Thanks to the care taken in the journey of the drink, no need for motorization anymore, a simple suction from the driver is enough!

This material was tested at a temperature of 70° ambient for 24 hours, with a result fully in accordance with use. The opening strap has been added following validations from Teams Endurance.

Tip-Top is the nickname of this Extreme Drink!

Weight of the complete kit: 990 grams (excluding suitcase)

Including:
- 1 bottle holder to be fixed in the vehicle including 1 transparent flexible connection length 2 meters + 1 female waterproof fitting + 1 double yellow 'car' plug Drink and radio (radio cable not provided),
- 1 interchangeable stainless steel bottle without a pump, with its technical cap,
- 1 yellow double plug "headset" Drink and radio (radio cable not included) equipped with 1 male waterproof connection + 1 flexible link + 1 180° link + 1 pipette
- 1 pouch with hook and loop fastener kit for quick attachment of the elements + 3 radio cable locks for headphones + 2 radio cable retaining collars on flexible.
- The kit is delivered in a rigid transport suitcase.

The canteens without a pump as well as the individual helmet equipment for the other drivers are present in the Extrem Drink section of the site, as is the booth bottle.

A maintenance service is at your disposal to ensure the total longevity of your equipment, as well as a customized service for specific integrations or the manufacturing of maintenance interfaces at your convenience. Contact us.

DIRECTIONS FOR USE

Look for a location, vertical DRINK support, allowing quick change of the bottle.
Securely fix the support in the vehicle, either by metal collars or via the 4 Ø6 holes (60x54 mm spacing).

Position the flexible link part and securely attach the double "car" plug to a quick access location for pilot change.

Accessorize the helmet and test the whole thing.

To have an easier distribution of water, start the water in your mouth before the rolling session.

To extract the gourd, pull the upper part of the support firmly in line via the strap.
To reposition the water bottle, place it on the base of the holder and press firmly on the upper part.

It’s simple and effective, even at night with your eyes closed!

The manufacturing time of our products is controlled.
In case of stock shortage or if you need a quantity greater than that usually available on the site, please contact us.

recommended products