Skip to product information
AUTOMATIC CHAIN OIL DOSING SYSTEM - DHC-950
1/5
  • AUTOMATIC CHAIN OIL DOSING SYSTEM - DHC-950
  • AUTOMATIC CHAIN OIL DOSING SYSTEM - DHC-950
  • AUTOMATIC CHAIN OIL DOSING SYSTEM - DHC-950
  • AUTOMATIC CHAIN OIL DOSING SYSTEM - DHC-950
  • AUTOMATIC CHAIN OIL DOSING SYSTEM - DHC-950
  • AUTOMATIC CHAIN OIL DOSING SYSTEM - DHC-950
  • AUTOMATIC CHAIN OIL DOSING SYSTEM - DHC-950
  • AUTOMATIC CHAIN OIL DOSING SYSTEM - DHC-950
  • AUTOMATIC CHAIN OIL DOSING SYSTEM - DHC-950
  • AUTOMATIC CHAIN OIL DOSING SYSTEM - DHC-950
AUTOMATIC CHAIN OIL DOSING SYSTEM - DHC-950

AUTOMATIC CHAIN OIL DOSING SYSTEM - DHC-950

$89.94 USD

No more overdosing of chain oil that pollutes the track and karting.
With sufficient volume and great ease of use, the oil dispenser is indispensable.

For further explanation, see the tabs below.
PRODUCT INFORMATION

By using excessive amounts of chain oil, the latter becomes the most significant source of dirt on the kart and the track.

To overcome this major drawback, adopt the oil doser designed by Team Extrem Motorsport.

Simple to use and very economical by eliminating expensive oil cans and post-use cleaning products.
It also saves time and provides peace of mind, which is not insignificant in managing your karting business.
DIRECTIONS FOR USE

The chain oil dosing kit is easy to install:
- Position the reservoir on the chain guard between the 2 sprockets, with the elbow fitting aligned with the outer edge.
- Secure the tank using the 2 screws (simply put a dab of grease on the 2 threaded holes to mark the location to drill).
- Locate the ideal position near the motor sprocket above the lower strand of the chain and drill a Ø6 hole directly above it.
- Position the elbow on the small tube side in the hole and secure it with the supplied plastic clamp. Adjust the length of the small tube so that the drop of oil falls in line with the chain.
- Position the long tube in the tank fitting, adjusting its length as needed.
It's ready!

Apply a thick, stringy oil using a syringe to precisely fill the reservoir to the very top without overflowing (example stringy oil for chainsaw chain).
Immediately screw the cover on for 2 turns and watch the oil deposit on the chain.

Each time the chain needs lubrication, turn the reservoir cap approximately 1 turn while rotating the wheel to distribute the oil over all the links and sprockets.

When the lid is screwed on all the way, there is no more oil, so refill it.

The manufacturing time of our products is controlled.
In case of stock shortage or if you need a quantity greater than that usually available on the site, please contact us.

recommended products